Modules

Overview

The module controls how the data is transfered and transalted into the output.

Note: Clock Data from PRIME has a slight delay compared to the Controller Clock.

• Direct Proxy - Direct transfer with no changes made to file
• Serial Data Conversions (Daktronics Controller & OES)
• Caption Decoder - Closed Caption Translation tool
• StatCrew - Web based stream data

Create a new module

To add a new module:

1. Select the dropdown menu in the top left corner.
2. Click Module.
3. The Module Type window will open.
4. Select the type of module you want to create.
5. Click OK.

6. Depending on the selected module type, the below window will open next.

7. Complete the settings for the selected module type.

8. Click Ok button.

Note: Output location can remain blank in the settings window.

1. Caption decoder settings
2. Select the Caption Type.
3. Select auto clear seconds. Default is set to 5 seconds.
4. Log into the application.
5. Select Connection.

Direct Proxy Settings

Serial Connection Settings

Interpreter

Once the module is created, and the output is set to the module. The interpreter feature can be enabled.

1. Right click on the output to open the Interpreter window.
2. Click Add button.
3. Select from the available type for interpreters.

Complete the following window that will open for each one of the types.

Once all fields are complete, the interpreter will populate in the ouput column. This setting will continue to work in the background as new data is sent via Click Effects and user does not take any further action.